2x 12V35AH Deep Cycle Battery for Scooter Pride Mobility Jazzy Select

• LFP1235 Sealed Lead Acid Rechargeable Maintenance Free Battery, Size: 7.68 x 5.12 x 7.09 inches. Quantity: 2 x Battery ( with Screws, but No wire harness or mounting).
• Compatible with 24 Volt Electric Wheelchair, if Put 2 Battery in Series, It Could Get 24V Voltage. Replaces 31Ah 32Ah 33Ah 34Ah 36Ah MX-123 MX-12310 ES33-12 PS33-12D CSB GP12340 BP35-12 CLTXPA1235C TR35-12 U1-35.
• Depend on the Devices, It May Need to Put More Together to Get Enough Voltage or Capacity, to Used For Wheelchair, Scooter, Solar Panel Wind Energy Storage, Trolling Motor, Industrial and Medical Equipment, Golf Cart, Hunting, Lawn and Garden Tools, Portable Tools, Emergency Lighting, UPS, Computer Power Backup, Leisure, RV House, Camping, etc.
• 12 Volt 35 amp hour batteries are typically used for mobility scooters and power chairs, homemade lightweight electric vehicles such as scooters, bicycles, go karts, and pedal cars. Since the 35AH battery is so big and heavy it stores a lot of energy and can offer extended run times on most lightweight electric vehicles. Because of this scooter batteries hefty weight it is primarily used on 3-wheel and 4-wheel electric vehicles which are self balancing.

Sealed Battery&Safe Charging

• Manufactured with thick absorbent glass mat (AGM) separators and advanced valve regulated technology, the battery is maintenance-free, leak-proof, and gas-free.
• SLA batteries are utilized in a wide variety of applications including; Solar Panel Off-Grid Applications, Back-up Sump Pump, Kayak Trolling Motor, RV VAN Camping Trip, Travel Trailer, Golf Carts, Consumer Electronics, Electric Vehicles, Hunting, Fishfinder, Lawn and Garden Tools, Medical Mobility, Portable Tools, Toys and Hobby, Access Control Devices, Emergency Lighting, Security and more.

The 12 Volt 35 AMP Hour Deep Cycle Battery uses a state of the art, heavy-duty, calcium-alloy grid that provides exceptional performance and service life in both float and cyclic applications.

Specifications:

• Voltage: 12 Volt
• Amperage: 35 AH
• Chemistry: SLA, AGM
• Battery Dimensions: 7.68 in x 5.12 in x 6.10in
• Package Weight: 23.1 Lbs
• The battery comes with two Zinc-plated M8 terminal bolts for cable wiring. And there are positive (+) and negative (-) icons on the container for easy wiring identification.
• Built with rugged ABS container material, the battery is vibration resistant and durable.

• Absorbent glass mat technology and maintenance-free
• ABS container, Prevent air and spark going inside
• Grid refining technology and the thicker
• Plates are used to extend the battery standby
• Life and reduce the plate grid corrosion speed
• Using oxygen recombination technology
• Unique vent valve design: control water losing
• Recognized by UL & CE

SLA batteries have a low self-discharge rate - about 40% per year or 3.3% per month. These batteries are able to be stored without charging for up to 5-6 months when at full capacity, but doing so is not recommended. At least every 2-3 months you should top charge them. In order to prolong their shelf life, SLA batteries should be stored and maintained properly.

Best Practices

• Store batteries in a cool, dry place (optimally 75 degrees Fahrenheit / 23 degrees Celsius or less)
• Periodical top charging of the batteries is recommended
• Store batteries in a fully charged state

Our batteries can be used in various types of:

• Access Control Systems
• Home Alarm Systems
• Burglar Alarm Systems
• Security Systems
• Electric scooters and bikes
• Electric wheelchairs
• Ride-on Toys
• Golf Carts

Connecting batteries

NOTE: The maximum number that can be connected in series is 4. In parallel, there are no limitations.

IN SERIES

By connecting the batteries in series you are doubling the voltage and maintaining the same capacity (amp hours). Connect the positive terminal of the first battery to the negative terminal of the second one. From the two free terminals connect the positive to the power lead on your devise, and the negative to the ground connection of your application.

PARALLEL

By connecting the batteries in parallel you are doubling the capacity (amp hours) and maintaining the same voltage. Connect the positive terminal of the second battery to the positive terminal of the first battery. Do the same with the negative terminals. Connect your application to the positive and negative terminals of the first battery.

IMPORTANT INFORMATION BEFORE YOU BUY

In order to find the best replacement for your original battery you need to compare the physical dimensions, Volts and Amp power of your original model to our battery.Besides physical dimensions you also need to check battery terminals , which are the metal connectors on top of the battery. To determine what terminal your battery has, you will need to look at their form and determine if they have a flat connector, nut and bolt or wires, and then measure their sizes.

• The maximum 1100A discharge (5 seconds) is suitable for appliances that require a high startup current, like a fridge.
• With a consistent and stable discharge, the battery can power up most common home appliances, such as a microwave, CPAP, coffee maker, laptop, and more.